Item |
Characteristic |
Rated working voltage range |
6.3 ~ 100VDC |
Capacitance Tolerance |
¡Ó20% (M), ¡Ó10% (K) |
Operating Temp. range |
-40 ~ +85¢J |
DC Leakage current |
I ¡Ø0.04CV or 4£gA whichever is greater
After 2 minutes application of DC Working Voltage at 20¢J
I:Leakage current (£gA) C:Rated capacitance (£gF) V:DC Working Voltage (V) |
Dissipation Factor (tan£_) at 120Hz 20¢J |
It should be increased by 0.02 for every exceeds 1000£gF |
W.V.(V) |
6.3 |
10 |
16 |
25 |
35 |
50 |
63 |
100 |
tan£_ |
0.24 |
0.20 |
0.17 |
0.15 |
0.12 |
0.10 |
0.11 |
0.10 |
Load Life
(1000 Hours) |
At 85¢J, rated DC working voltage applied, the capacitor shall meet the following limits |
Capacitance Change |
within 20% of initial value |
Dissipation factor |
¡Ø200% of initial specified value |
Leakage current |
¡Øinitial specified value |
Shelf Life
(500 Hours ) |
At 85¢J,no voltage applied, the following specification shall be satisfied |
Capacitance change |
within 20% of initial specified value |
Dissipation factor |
¡Ø200% of initial specified value |
Leakage current |
¡Øinitial specified value |